ATM_ID: 8E7DF284-6C87-11F0-962F-30CFC0ACCDE0

MFF:

PLANNEDTIMESTAFF:

ID: ETL/Copy_Print_Testcases/165640

TESTCASE_HEADLINE: COPY - Booklet-COP-16999

GROUP:

FEATURE:

SUB_FEATURE:

INPUT: This test case will verify the Basic Functionality of Create Booklet setting available in Copy screen

PROCEDURE: Create Booklet Without FDHTU + Finisher installed on the device
 • Go to COPY and select Create Booklet
 • Set Create Booklet to 1 sided to Booklet
 • Place 10 sheets of front sided original in ADF
 • Start the Copy Job
 • Verify every 2 images are printed in one single page just like n-up copy 
 • Set Create Booklet to 2 sided to Booklet
 • Place 10 sheets of 2 sided original in ADF
 • Start the Copy Job
 • Verify front and back image of the 1st original is printed in front of the first page of the image output. Front and back image of the 2nd orginal is printed at the back of the first page of the image output
 
 Create Booklet With FDHTU + Finisher installed on the device
 • Go to COPY and select Create Booklet
 • Set Create Booklet to Off
 • Turn on Staple and Fold option
 • Place 10 sheets of n-up originals in ADF
 • Start the Copy Job
 • Verify image output is printed%2c folded and stapled correctly. Correct sequence of the images are placed on the right page of the image output%2c from front up to the back page of the booklet output. 
 • Go to COPY and select Create Booklet
 • Set Create Booklet to Off
 • Turn on Fold without Stapling option
 • Place 10 sheets of n-up originals in ADF
 • Start the Copy Job
 • Verify image output is printed%2c folded correctly without staple. Correct sequence of the images are placed on the right page of the image output%2c from front up to the back page of the booklet output. 
 • Go to COPY and select Create Booklet
 • Set Create Booklet to 1 sided to Booklet
 • Turn on Staple and Fold option
 • Place 10 sheets of front sided original
 • Start the Copy Job
 • Verify image output is printed%2c folded and stapled correctly. Correct sequence of the images are placed on the right page of the image output%2c from front up to the back page of the booklet output. 
 • Go to COPY and select Create Booklet
 • Set Create Booklet to 1 sided to Booklet
 • Turn on Fold without Stapling option
 • Place 10 sheets of Front sided originals in ADF
 • Start the Copy Job
 • Verify image output is printed%2c folded correctly without staple. Correct sequence of the images are placed on the right page of the image output%2c from front up to the back page of the booklet output
 • Go to COPY and select Create Booklet
 • Set Create Booklet to 2 sided to Booklet
 • Turn on Staple and Fold option
 • Place 10 sheets of 2 sided original
 • Start the Copy Job
 • Verify image output is printed%2c folded and stapled correctly. Correct sequence of the images are placed on the right page of the image output%2c from front up to the back page of the booklet output. 
 • Go to COPY and select Create Booklet
 • Set Create Booklet to 2 sided to Booklet
 • Turn on Fold without Stapling option
 • Place 10 sheets of 2 sided originals in ADF
 • Start the Copy Job
 • Verify image output is printed%2c folded correctly without staple. Correct sequence of the images are placed on the right page of the image output%2c from front up to the back page of the booklet output
 
 Paper sizes that support Booklet
 • Verify Booklet is supported on the following sizes
 
 • SEF Letter 
 • SEF A4 
 • Legal 
 • Folio 
 • Oficio(Mexico) 
 • Tabloid(11x17) 
 • A3 
 • SRA3 
 • 12x18 
 
 
 • Set Copy To with each of the above sizes. Make sure to test each size
 • Set Booklet to 1 sided to Booklet or 2 sided to Booklet
 • Place multiple sizes in ADF
 • Start the Copy job
 • Verify that image output is folded with correct sequence of scanned images printed on the correct side of the page. 
 • Verify that Booklet is supported from all printer trays (Tray1-Tray5 if applicable)
 • If finishing option is enabled/selected%2c make sure that Staple and Fold or Fold without Stapling is applied on the image output

TEST_COVERED_BY:

SRT_ANALYZATION:

PROCESS:

PRIORITY:

TEST_TYPE:

LOE:

RESOURCE_HW:

RESOURCE_CONSUMEABLES:

RESOURCE_MEDIA:

SKILL_SET:

TEST_CASE_TYPE:

TESTCASE_SOURCE:

SPEC:

SPEC_NUM:

SPEC_VERSION:

SPEC_TAG:

ATM_OWNER:

APPROVE_QE:

APPROVED_QE:

APPROVE_SE:

APPROVED_SE:

APPROVE_SPAR:

APPROVED_SPAR:

ASSOCIATED_TESTCASES:

TRAINING:

TESTCASE_VERSION:

TESTCASE_STATE:

TESTCASE_PLATFORM:

TESTCASE_PRODUCT:

TESTCASE_FAMILY:

TESTCASE_APPROVALS:

CDATE: 1753798991

MDATE: 1753798991

MUSER: w4zfpb7v

AUTHOR: w4zfpb7v

ATM_MCOMMENTS: Imported from spreadsheet

HISTORY:

ATM_LOCKED:

ATM_REQLINK:

ATM_REQCOUNT: 0

QA_TEAM:

TC_WEIGHTAGE:

FILENAME:

FILEDESC:

FILES:

RELEASE:

COMPETENCY:

AUTOMATION_GROUP:

TESTCASE_STEPS_ARE_RELATED_TO:

REASON_FOR_AUTOMATABLE:

PRECONDITION_TO_BE_DONE:

ACTION_TO_BE_DONE:

COMMON_FUNCTIONALITY:

COMMONALITY_DETAILS:

CONSTRAINTS_DAR:

DEVELOPMENT_COMPLETE_TIME:

PO_SIGNOFF_DATE:

COMPLEXITY_PRECONDITIONS:

COMPLEXITY_OUTPUT_VALIDATION:

AUTOMATABLE:

AUTOMATION_CANDIDATE:

TESTCASE_MODIFICATION_REQUIRED:

APTEST_UPDATE_STATUS:

DEVICE_CATEGORY:

TC_WORK_LOCATION_CAT:

AUTOMATION_TC_VALIDATION: