ATM_ID: 0E586BE6-6E47-1014-ABB1-2EAE56619FB6

MFF: 20411_11

PLANNEDTIMESTAFF:

ID: DPQA_Regression_Connectivity/Testcases/FS_47.055_Airprint/84118

TESTCASE_HEADLINE: To check the Airprint configuration through MIB when Airprint is Hidden

GROUP:

FEATURE:

SUB_FEATURE:

INPUT: <P>1.  Upgrade the MFD with Atlantis 1.0 launch or with higher versions (where Airprint certifications is not ready).
<P>2. Install and configure MIB tool in the working PC.
<P>3. Install and configure MITS tool in the device.
<P>4. Connect A to B cable to the MFD with the working PC.

PROCEDURE: 1. Login to the WebUI and verify the enablement of Airprint by navigating to Properties -> Connectivity -> Setup -> Airprint (Say Airprint is enabled).
<P>2. From linux PC, perform the following SNMP operation

<P>3. snmpset -v2c -cprivate MFD IP 1.3.6.1.4.1.253.8.51.10.2.1.2.7.22467000 i 4
<P>4. snmpset -v2c -cprivate MFD IP 1.3.6.1.4.1.253.8.51.10.2.1.3.7.22467000 o 1.3.6.1.4.1.253.8.63.14.1507.31
<P>5. snmpset -v2c -cprivate MFD IP 1.3.6.1.4.1.253.8.51.10.2.1.4.7.22467000 i 8
<P>6. snmpset -v2c -cprivate MFD IP 1.3.6.1.4.1.253.8.51.10.2.1.5.7.22467000 i "2"
<P>7. snmpset -v2c -cprivate MFD IP 1.3.6.1.4.1.253.8.51.9.2.1.2.7.1 i 4
<P>8. snmpset -v2c -cprivate MFD IP 1.3.6.1.4.1.253.8.51.9.2.1.3.7.1 i 22467000
<P>9. snmpset -v2c -cprivate MFD IP 1.3.6.1.4.1.253.8.51.9.2.1.4.7.1 i 6

<P>10. Perform the below SNMP get Operation to check the value of Airprint,
snmpget -v2c -cpublic MFD IP 1.3.6.1.4.1.253.8.64.4.2.1.5.7.22467000

OUTPUT: MIB browser should throw an error prompt, due to non-availability of Airprint functionality in the device and the Airprint should remain in hidden state.
<P> Validate the same through Read NVM by chain/link value in backchannel and MITS tool (NVM read) operation.

PROCESS:

PRIORITY:

TEST_TYPE:

LOE:

RESOURCE_HW:

RESOURCE_CONSUMEABLES:

RESOURCE_MEDIA:

SKILL_SET:

TEST_CASE_TYPE:

TESTCASE_SOURCE:

SPEC: FS 47.055 Airprint

SPEC_VERSION: 1.0077

SPEC_TAG: [47.055.042] (FT-14212) CCSFEAT18675 [D2.2 - *] The AirPrint enable/disable setting shall be configurable via MIB table: xcmCommsOptionTable - iOS Device Discovery/Advertisement enable, value 1.3.6.1.4.1.253.8.63.14.1507.31

ATM_OWNER:

APPROVE_QE:

APPROVED_QE:

APPROVE_SE:

APPROVED_SE:

APPROVE_SPAR:

APPROVED_SPAR:

ASSOCIATED_TESTCASES:

TRAINING:

TESTCASE_VERSION:

TESTCASE_STATE:

TESTCASE_PLATFORM:

TESTCASE_PRODUCT:

TESTCASE_APPROVALS:

CDATE: 1476875694

MDATE: 1476875694, 1501222006

MUSER: q3sjpj97, w3K3WRKH

AUTHOR: q3sjpj97

ATM_MCOMMENTS: Imported from spreadsheet, Renamed from "DPQA_Regression_Connectivity/Testcases/FS_47.055_Airprint/FT-20411_Support_AirPrint_EnableDisable_via_NVM/84118".

HISTORY:

ATM_LOCKED:

ATM_REQLINK: A9EC9D17-7B45-1014-8763-B67ABFF40DC2

ATM_REQCOUNT: 1

QA_TEAM:

TC_WEIGHTAGE:

FILENAME:

FILEDESC:

FILES: