ID: DPQA_Regression_Connectivity/Testcases/FS_47.055_Airprint/59777

ATM_ID: A8673AB7-8715-1014-8CFE-FA6311DF7A1F

MFF:

PLANNEDTIMESTAFF:

TESTCASE_HEADLINE: To verify the standalone Flash action

GROUP:

FEATURE:

SUB_FEATURE:

INPUT: <p></p>
<ol><li value="1">Device should have 9th Gen UI consists of Emotional Amber and Blue array of LEDs.<br />
</li><li value="2"> Air print is enabled on the device.<br />
</li><li value="3"> APVT tool is installed on  the device.<br />
</li><li value="4"> Identify printer option is enabled on the device.<br />
</li><li value="5">Ensure the testing device and the testing PC is on same network.</li></ol>

PROCEDURE: <p>Procedure 1:<br />
</p>
<ol><li value="1">From the APVT tool  search for the testing MFD.<br />
</li><li value="2">Once the device is discovered in the list  Select the device in secured mode(HTTPs) .<br />
3.Choose Identify Printer option.<br />
</li><li value="4">Check "Flash "action alone in the opened dialog box and select "OK". <br />
</li><li value="5">Verify the LUI behavior along with “Blue LED High Rate Breathing two times” blinks. .<br />
<br />
Procedure 2:<br />
</li><li value="1">Submit ipptool identify printer with flash action to the device as follows :-<br />
ipptool -tv ipp://$device-ip/ipp/ Identify-printer-flash. Test <br />
---------------<br />
Special Note:<br />
Identify-printer-flash. Test<br />
is the test file placed in the same location as the ipptool or provide the complete path of the file if the file is stored in another location.<br />
---------------<br />
</li><li value="2">Verify the flash action and the SR3 message  in the LUI screen along with “Blue LED High Rate Breathing two times” blinks</li></ol>

OUTPUT: <p>LUI  should display the ‘High Rate Breathing’ pattern twice using the ‘Interact LED’ bar (the blue LEDs)  along with the SR3 message for both the procedures.</p>

PROCESS:

PRIORITY:

TEST_TYPE:

LOE:

RESOURCE_HW:

RESOURCE_CONSUMEABLES:

RESOURCE_MEDIA:

SKILL_SET:

TEST_CASE_TYPE:

TESTCASE_SOURCE:

SPEC: FS 47.055 Airprint

SPEC_VERSION: 1.0067999999999999

SPEC_TAG: [47.055. 069] (FT-18594) [D3.6 - *] When the ‘Identify the Printer’ message action is not raised with any combination of either the audible tone action and/or the flash action, the MFD shall concurrently raise a descriptive SR3 message for seven seconds and at highest priority; identifying that the cause of the tone action or flash action pattern is a mobile user trying to locate the device. 
D3.6 Actions Tabulation 

ATM_OWNER:

APPROVE_QE:

APPROVED_QE:

APPROVE_SE:

APPROVED_SE:

APPROVE_SPAR:

APPROVED_SPAR:

ASSOCIATED_TESTCASES:

TRAINING:

TESTCASE_VERSION:

TESTCASE_STATE:

TESTCASE_PLATFORM:

TESTCASE_PRODUCT:

TESTCASE_APPROVALS:

CDATE: 1463565724

MDATE: 1463565724, 1482903557

MUSER: vimalachristinal.c, Srinivasan.M

AUTHOR: vimalachristinal.c

ATM_MCOMMENTS: Imported from spreadsheet, Renamed from "DPQA_Regression_SYSTEM/Testcases/D3.6_New_Feature/FT-18594_Emotive_LED/59777".

HISTORY:

ATM_LOCKED:

ATM_REQLINK: 6F9D9677-6E74-1014-99C5-A64365B72226

ATM_REQCOUNT: 1

QA_TEAM:

TC_WEIGHTAGE:

FILENAME:

FILEDESC:

FILES: